Effects of Place Identity,Place Dependence,and Experience-Use History on Perceptions of Recreation Impacts in a Natural Setting

It is generally accepted that recreation use in natural environments results in some degree of negative social and environmental impact. Environmental managers are tasked with mitigating the impact while providing beneficial recreation opportunities. Research on the factors that influence visitors' perceptions of environmental and social conditions is necessary to inform sound environmental management of protected natural areas. This study examines the effect of prior experience with the setting and two dimensions of place attachment (i.e., place identity and place dependence) on visitors' perceptions of three types of recreation impacts (i.e., depreciative behavior, environmental impacts, and recreation conflict). Principal components analysis, confirmatory factor analysis, and structural equation modeling were used to test the study hypotheses using data collected from 351 visitors through on-site questionnaires (response rate of 93 percent). The results show that prior experience exhibited a moderate and significant direct positive effect on place identity, place dependence, and visitors' perceptions of recreation impacts. Contrary to study hypotheses and prior research, neither place dependence nor place identity exhibited a significant effect on the dependent variables. The results show that prior experience causes visitors to be more sensitive to depreciative behaviors, environmental impacts, and recreation conflict. These findings raise concerns over potential visitor displacement and deterioration of site conditions. Implications for resource managers are discussed, which include education, modifying visitor use patterns, and site design strategies.     

Assessing exposure to allied ground troops in the Vietnam War: A quantitative evaluation of the Stellman Exposure Opportunity Index model

The Exposure Opportunity Index (EOI) is a proximity-based model developed to estimate relative exposure of ground troops in Vietnam to aerially applied herbicides. We conducted a detailed quantitative evaluation of the EOI model by using actual herbicide spray missions isolated in time and space. EOI scores were calculated for each of 36 hypothetical receptor location points associated with each spray mission for 30 herbicide missions for two time periods – day of herbicide application and day 2–3 post-application. Our analysis found an enormous range of EOI predictions with 500–1000-fold differences across missions directly under the flight path. This quantitative examination of the EOI suggests that extensive testing of the model’s code is warranted. Researchers undertaking development of a proximity-based exposure model for epidemiologic studies of either Vietnam veterans or the Vietnamese population should conduct a thorough and realistic analysis of how precise and accurate the model results are likely to be and then assess whether the model results provide a useful basis for their planned epidemiologic studies.     

Effect of temperature and humidity on formaldehyde emissions in temporary housing units

The effect of temperature and humidity on formaldehyde emissions from samples collected from temporary housing units (THUs) was studied. The THUs were supplied by the U.S. Federal Emergency Management Administration (FEMA) to families that lost their homes in Louisiana and Mississippi during the Hurricane Katrina and Rita disasters. On the basis of a previous study, four of the composite wood surface materials that dominated contributions to indoor formaldehyde were selected to analyze the effects of temperature and humidity on the emission factors. Humidity equilibration experiments were carried out on two of the samples to determine how long the samples take to equilibrate with the surrounding environmental conditions. Small chamber experiments were then conducted to measure emission factors for the four surface materials at various temperature and humidity conditions. The samples were analyzed for formaldehyde via high-performance liquid chromatography. The experiments showed that increases in temperature or humidity contributed to an increase in emission factors. A linear regression model was built using the natural log of the percent relative humidity (RH) and inverse of temperature (in K) as independent variables and the natural log of emission factors as the dependent variable. The coefficients for the inverse of temperature and log RH with log emission factor were found to be statistically significant for all of the samples at the 95% confidence level. This study should assist in retrospectively estimating indoor formaldehyde exposure of occupants of THUs.     

Status and Future of Baghouses in the Utility Industry

Abstract

The cumulative years of service of baghouses in the electric utility industry have doubled since the last industrywide review of their operating performance. We have gathered information from all 102 operating baghouses to develop an updated record of how this technology continues to serve the electric utility industry. In general, baghouse performance has met or exceeded the expectations for controlling emissions. There are, however, wide ranges of pressure drop and bag life performance. Most operators report a long-term trend of increasing pressure drop. The life expectancy of filter bags averages 7.5 years, with more than 20% of the population achieving more than 10 years of bag life. Factors such as coal and ash properties certainly affect baghouse operation, but another reason for variations in bag life is the lack of an optimized protocol for controlling the long-term buildup of residual dustcake. We conclude that many baghouses could operate with lower pressure drop and longer bag life by optimizing the cleaning system. Dustcake weight or drag are better indicators of performance than pressure drop and should be used to develop an optimum baghouse operating protocol.     

Operating History and Current Status of Fabric Filters in the Utility Industry

Electric utilities have made significant progress in recent years in designing and operating baghouses for collection of coal fly ash. As a result, early concerns with high operating and maintenance requirements and short bag lives are no longer an issue. With increasingly stringent air emissions regulations and imminent revision of the Clean Air Act, baghouses have become an attractive particulate collection option for utilities.

In order to keep its member utilities apprised of the latest design and operation and maintenance experience with baghouses, the Electric Power Research Institute has been conducting surveys of utility baghouse user experience. This paper presents results from the latest survey, conducted in 1989. A previous survey was conducted in 1985. The 1989 survey was conducted using questionnaires mailed to the utilities, telephone inquiries, and plant visits. This paper discusses the general trends observed in baghouse design, performance, operation and maintenance.     

Runoff Curve Numbers at the Agricultural Field‐Scale and Implications for Continuous Simulation Modeling

This study used monitoring in the waterways of agricultural fields to understand the use of the runoff curve number (CN) in continuous simulation models. The CN has a long history as a design tool for estimating runoff volumes for large, single storms on small watersheds, but its use in continuous simulation models to describe runoff from smaller storms and relatively small areas is more recent and controversial. We examined 788 nonwinter rainfall events on four agricultural fields over five years (2004‐2008) during which runoff was generated in 87 events. The largest 20 runoff events on each field generated approximately 90% of the total runoff volume. The runoff event CNs showed an inverse correlation with storm depth that could not consistently be explained by previous precipitation. We review how small areas of higher runoff generation within larger areas will systematically increase the apparent CN of the larger area as the storm size decreases. If this variation is not incorporated into a model explicitly, continuous simulation modelers must understand that when source areas are aggregated or when runoff generation is spatially variable, the overall CN is not unique when smaller storms are included in the calibration set.     

Evaluation of weather conditions for methyl bromide ambient air monitoring in Monterey, Santa Cruz, and Kern Counties in the year 2000

Weather condition is one of the most important factors affecting spatial and temporal distributions of air pollutants, especially for short-term air dispersion. Abnormal weather conditions might lead to higher or lower ambient air concentrations than they would be under normal weather conditions. Therefore, testing for normality of weather conditions during the air monitoring period is an essential step for evaluating ambient air monitoring results. In this paper, a distance method was used to select a most representative weather station from the available candidates. An array of meteorological elements were identified that affect air dispersion and transportation. A statistical method was used to determine whether the weather conditions during the air monitoring period were significantly different from that of previous years. Using methyl bromide ambient air monitoring as a case study, this paper documents the methods, procedures, and results of weather analysis for Monterey, Santa Cruz, and Kern Counties during ambient air monitoring periods for methyl bromide in the year 2000. With a few exceptions, the meteorological elements and atmospheric stability factors, such as wind speeds, wind directions, and stability classes, during the monitoring period were in the normal range. Although there were higher frequencies of stable atmospheric conditions in Monterey/Santa Cruz Counties than in Kern County, weather conditions during the monitoring period were not significantly different from normal local weather conditions of previous years. Consequently, the subchronic air concentrations observed during the ambient air monitoring periods for methyl bromide in the year 2000 was taken under typical weather conditions of those areas at that time of the year.     

Sediment concentration and turbidity changes during culvert removals

The concentrations of sediment and turbidity in stream water were monitored during culvert removals to determine the short term effects of road obliteration. Sediment concentration was measured at 11 stream crossings among two locations in Idaho and one in Washington. Sediment concentration immediately below the culvert outlet exceeded levels above the culvert outlet by at least three orders of magnitude at all stream crossings. Sediment yields ranged from 170 to less than 1kg in the 24-h period following culvert removal. Turbidity exceeded the regulatory limits during culvert removal at all locations monitored in this study and remained above the limits beyond the monitoring periods of 24h at four of the locations. Sediment concentrations 100m downstream of the culvert outlet were reduced by an order of magnitude, but did not change the turbidity values sufficiently to meet regulatory limits. Sediment concentrations an average of 810m downstream of the culvert outlet were similar to sediment concentrations above the culvert for the entire excavation period and turbidity regulations were met. Mitigation consisting of two straw bales placed in the stream caused a significant reduction in sediment yield from an average of 67kg to an average of 1.6kg.     

In situ biofilm barriers: Case study of a nitrate groundwater plume,Albuquerque, New Mexico

A new use for biofilm barriers was developed and successfully applied to treat nitrate‐contaminated groundwater down to drinking water standards. The barrier was created by stimulating indigenous bacteria with injections of molasses as the carbon donor and a combination of yeast extract and trimetaphosphate as nutrients. This injection of amendments results in bacterial growth in the aquifer, which attaches to the sand grains to create a reactive semipermeable biofilm. The biofilm barrier presented in this article reduced the migration of contaminants and provided an active zone for remediation. The cylindrical biobarrier was constructed using eight wells on the perimeter forming a 60‐foot‐diameter reactive biodenitrification region. Another well at the center was installed to continuously extract the treated water. The intent was to produce a continuous source of nitrate‐free water. The system operated for over one year, and during this period, the biobarrier was revived multiple times by reinjecting molasses in the perimeter wells. Nitrate concentrations of treated water decreased from 275 mg/L (as nitrogen) to < 1 mg/L. © 2005 Wiley Periodicals, Inc.     

Are soil conservation technologies “win‐win?” A case study of Anjeni in the north‐western Ethiopian highlands

This study measures the impact of fanya juu terraces on the net value of crop income in a high‐rainfall area in the Ethiopian highlands using cross‐sectional multiple plot observations. Using propensity score matching methods we find that the net value of crop income for plots with fanya juu terraces is lower than for plots without fanya juu terraces. This finding makes it difficult to avoid concluding that while the technologies might reduce soil erosion and associated off‐site effects, they do so at the expense of poor farmers in the Ethiopian highlands. Therefore, fanya juu terraces cannot be characterized as a “win‐win” measure to reduce soil erosion. New agricultural technologies need to be profitable to the farmer if they are to be adopted and sustained.